Show FELCO tools

You want to maintain your tool?

Please select it from the list below.

FELCO 2

FELCO 2

  • High performance - Classic model
Available maintenance videos:
  1. Cleaning

    FELCO 2 CleaningThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

  2. Oiling

    FELCO 2 OilingThe videos do not necessarily show the chosen tool. But the handling is the same.

    After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

  3. Sharpening

    FELCO 2 SharpeningThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

  4. Dismantling

    FELCO 2 DismantlingThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

The videos do not necessarily show the chosen tool. But the handling is the same.Warning: inappropriate handling may result in physical injuries.

Most popular videos

Show FELCO tools

You want to replace parts in your tool?

Please select it from the list below.

FELCO 2

FELCO 2

  • High performance - Classic model
Available maintenance videos:
  1. Changing the blade

    FELCO 2 Changing the bladeThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.

  2. Changing the shock absorber

    FELCO 2 Changing the shock absorberThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.

  3. Changing the cushion

    FELCO 2 Changing the cushionThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the tool closes too abruptly during pruning and the shock absorber is in good condition, the cushion must be changed.

  4. Changing the thumb catch

    FELCO 2 Changing the thumb catchThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

  5. Changing the plastic coatings for handles

    FELCO 2 Changing the plastic coatings for handlesThe videos do not necessarily show the chosen tool. But the handling is the same.

    If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.

The videos do not necessarily show the chosen tool. But the handling is the same.Warning: inappropriate handling may result in physical injuries.

Most popular videos