Show FELCO tools

You want to maintain your tool?

Please select it from the list below.

FELCO 51

FELCO 51 Green

  • Special applications "Green"
  • Hoof clippers
Available maintenance videos:
  1. Cleaning

    FELCO 51 CleaningThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

  2. Oiling

    FELCO 51 OilingThe videos do not necessarily show the chosen tool. But the handling is the same.

    After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

The videos do not necessarily show the chosen tool. But the handling is the same.Warning: inappropriate handling may result in physical injuries.

Most popular videos

Show FELCO tools

You want to replace parts in your tool?

Please select it from the list below.

FELCO 51

FELCO 51 Green

  • Special applications "Green"
  • Hoof clippers
Available maintenance videos:
  1. Changing the shock absorber

    FELCO 51 Changing the shock absorberThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.

  2. Changing the cushion

    FELCO 51 Changing the cushionThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the tool closes too abruptly during pruning and the shock absorber is in good condition, the cushion must be changed.

  3. Changing the thumb catch

    FELCO 51 Changing the thumb catchThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

  4. Changing the plastic coatings for handles

    FELCO 51 Changing the plastic coatings for handlesThe videos do not necessarily show the chosen tool. But the handling is the same.

    If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.

The videos do not necessarily show the chosen tool. But the handling is the same.Warning: inappropriate handling may result in physical injuries.

Most popular videos