Show FELCO tools

You want to maintain your tool?

Please select it from the list below.

FELCO 100

FELCO 100 Green

  • Special applications "Green"
  • Cut & hold roses and flowers pruning shear
Available maintenance videos:

  1. Cleaning

    FELCO 100 CleaningThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

  2. Oiling

    FELCO 100 OilingThe videos do not necessarily show the chosen tool. But the handling is the same.

    After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

  3. Sharpening

    FELCO 100 SharpeningThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

  4. Dismantling

    FELCO 100 DismantlingThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

The videos do not necessarily show the chosen tool. But the handling is the same.Warning: inappropriate handling may result in physical injuries.

Most popular videos

Show FELCO tools

You want to replace parts in your tool?

Please select it from the list below.

FELCO 100

FELCO 100 Green

  • Special applications "Green"
  • Cut & hold roses and flowers pruning shear
Available maintenance videos:

  1. Changing the blade

    FELCO 100 Changing the bladeThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.

  2. Changing the anvil-blade

    FELCO 100 Changing the anvil-bladeThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

  3. Changing the shock absorber

    FELCO 100 Changing the shock absorberThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.

  4. Changing the cushion

    FELCO 100 Changing the cushionThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the tool closes too abruptly during pruning and the shock absorber is in good condition, the cushion must be changed.

  5. Changing the thumb catch

    FELCO 100 Changing the thumb catchThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

  6. Changing the plastic coatings for handles

    FELCO 100 Changing the plastic coatings for handlesThe videos do not necessarily show the chosen tool. But the handling is the same.

    If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.

The videos do not necessarily show the chosen tool. But the handling is the same.Warning: inappropriate handling may result in physical injuries.

Most popular videos