Replacement parts

For which FELCO tool would you like to consult the part replacement videos? (The videos do not necessarily show the choosen tool. But the handling is the same.)

FELCO 8CC Green

One-hand pruning shears - Elegance - High performance - Ergonomic - Available part replacement videos:

1 - Changing the blade

When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.

2 - Changing the anvil-blade

When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

3 - Changing the shock absorber

When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.

4 - Changing the cushion

When the tool closes too abruptly during pruning and the shock absorber is in good condition, the cushion must be changed.

5 - Changing the thumb catch

When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

6 - Changing the plastic coatings for handles

If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.