FELCO 19
- Green
- FELCO 8 with spraying device
Product Information
In brief
- Reliable: comfortable, light, sturdy handles made of forged aluminium with a lifetime guarantee* / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced
- Efficient: easy, durable cutting adjustment / wire cutting notch / sap groove
- Ergonomic: hand and wrist protection and optimisation of the force exerted are provided by the ideal shape of the handles, the angled head and the cushion-shock absorber / non-slip coating
Recommended for
Our recommendation(1: Recommended, 2: Strongly recommended, 3: Best fit)- Special applications:***
- Small hand:
- Average-sized hand:
- Large hand:***
- Left-handed:
Accessories
Spare parts
FELCO REF. Designation Composition 
2/30 Adjustment key 1x 2/30 
7/4 Anvil-blade with screw 1x 7/4 + 1x 7/6 
7/90 Kit 1x 7/7 + 1x 2/16 + 1x 2/9 + 1x 7/8 
2/91 Kit 2x 2/11 
2/92 Kit 1x 2/15 + 1x 2/18 + 1x 2/14 + 1x 2/12 + 1x 2/13 + 1x 2/20 
2/93 Kit 4x 2/18 + 6x 2/20 
7/94 Kit 1x 2/9 + 1x7/8 
7/2 Handle without anvil-blade 1x 7/2 + 1x 2/18 + 1x 7/36 
6/35 Coating for blade handle 1x 6/35 
7/36 Plastic coating for anvil-blade / anvil handle 1x 7/36 
7/5B Rivet for blade 1x 7/5B 
7/6 Screw for anvil-blade 1x 7/6 
7/8 Bolt 1x 7/8 
2/9 Nut 1x 2/9 
7/10 Bush 1x 7/10 
2/11 White spring 1x 2/11 
2/12 Thumb catch 1x 2/12 
2/13 Spring for thumb catch 1x 2/13 
2/14 Screw for thumb catch 1x 2/14 
2/15 Catch plate 1x 2/15 
2/16 Locking segment 1x 2/16 
7/7 Screw for locking segment 1x 7/7 
2/18 Cushion 1x 2/18 
2/19 Edging 1x 2/19 
2/20 Shock absorber 1x 2/20 Maintenance
Cleaning
It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.
Oiling
After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.
Sharpening
It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!
Dismantling
It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.
Parts replacement
Changing the blade
When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.
Changing the anvil-blade
When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.
Changing the shock absorber
When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.
Changing the cushion
When the tool closes too abruptly during pruning and the shock absorber is in good condition, the cushion must be changed.
Changing the thumb catch
When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.
Changing the plastic coatings for handles
If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.
