FELCO 210A-60

Made in Switzerland by FELCO

Product Information

  • In brief

    • Reliable: lightweight aluminium handles / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced
    • Efficient: easy, durable cutting adjustment / curved cutting head for easier pruning work
    • Ergonomic: shock absorbers protect wrists and arms / handles with non-slip coating

  • Recommended for

    Our recommendation(1: Recommended, 2: Strongly recommended, 3: Best fit)
    • Viticulture:**
    • Arboriculture:***
    • Horticulture:*
    • Parks and Gardens:***
    • Nursery:*
    • Small hand:***
    • Average-sized hand:***
    • Large hand:***
    • Left-handed:***

  • FELCO technical specifications

    • Curved cutting head
      Curved cutting head

      Effort-reducing cutting head.


    • Micrometric adjustment
      Micrometric adjustment

      FELCO's micrometric adjustment system guarantees an optimal adjustment of the cutting head throughout the life of the tool. It ensures a clean and precise cut.


    • Shock absorption system
      Shock absorption system

      The shock absorbers soften the impact upon finishing cutting as well as protecting the hand and wrist.


    • Aluminium handles
      Aluminium handles

      Lightweight, super-strong materials.


    • Modularity
      Modularity

      The tool can be modified at any time to suit changing needs: in this product group, the user can change the type and length of handles, or switch from straight to curved cutting heads.


  • Accessories

  • Spare parts

    FELCOREF.DesignationComposition
    2/302/30Adjustment key1x 2/30
    210/3210/3Blade1x 210/3
    210/4210/4Anvil-blade1x 210/4
    20/9320/93Kit2x 20/10
    20/9420/94Kit1x 20/9 + 1x20/8
    200/37200/37Joint1x 200/37 + 1x 20/10 + 1x 20/5 + 1x 70/59
    200A/42200A/42Aluminium handles length 42 cm (16.5 in.)2x 200A/42 + 2x 200/35
    200/35200/35Coatings2x 200/35
    20/520/5Pin1x 20/5
    70/5970/59Screw1x 70/59
    200/6200/6Screw1x 200/6
    20/820/8Bolt1x 20/8
    20/920/9Nut1x 20/9
    20/720/7Nut1x 20/7
    2/162/16Locking segment1x 2/16
    20/1120/11Screw for locking segment1x 20/11
    20/1020/10Shock absorber1x 20/10

  • Maintenance

    • Cleaning

      It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

    • Oiling

      After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

    • Sharpening

      It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

    • Dismantling

      It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

  • Parts replacement

    • Changing the blade

      When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.

    • Changing the anvil-blade

      When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

    • Changing the shock absorbers

      When the tool closes too abruptly during pruning the shock absorbers should be changed.