Made in Switzerland by FELCO

Product Information

  • In brief

    • Reliable: sturdy handles made of forged aluminium with a lifetime guarantee* / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced
    • Efficient: easy, durable cutting adjustment / wide blade opening
    • Ergonomic: shock absorbers protect wrists and arms / handles with non-slip plastic coating
  • Recommended for

    Our recommendation(1: Recommended, 2: Strongly recommended, 3: Best fit)
    • Viticulture:**
    • Arboriculture:**
    • Parks and Gardens:**
    • Small hand:***
    • Average-sized hand:***
    • Large hand:***
    • Right-handed:***
    • Left-handed:***
  • FELCO technical specifications

    • Straight cutting head
      Straight cutting head

      Ultra-precise cutting heads for the most demanding work.

    • Micrometric adjustment
      Micrometric adjustment

      FELCO's micrometric adjustment system guarantees an optimal adjustment of the cutting head throughout the life of the tool. It ensures a clean and precise cut.

    • Shock absorption system
      Shock absorption system

      The shock absorbers soften the impact upon finishing cutting as well as protecting the hand and wrist.

  • Accessories

  • Spare parts

    2/302/30Adjustment key1x 2/30$0.61
    22/322/3Blade1x 22/3$36.92
    22/422/4Anvil-blade1x 22/4$44.99
    21/9321/93Kit2x 21/10$5.87
    20/9420/94Kit1x 20/9 + 1x20/8$21.88
    22/122/1Handle with coating, pin and shock absorber1x 22/1 + 1x 20/2 + 1x 21/10 + 1x 22/5$69.08
    20/220/2Coating1x 20/2$7.95
    22/522/5Pin1x 22/5$1.10
    22/622/6Hexagon screw1x 22/6$1.96
    20/820/8Bolt1x 20/8
    20/920/9Nut1x 20/9
    C12/11C12/11Counter nut1x C12/11
    2/162/16Locking segment1x 2/16$1.59
    20/1120/11Screw for locking segment1x 20/11$1.10
    21/1021/10Shock absorber1x 21/10
  • Maintenance

    • Cleaning

      It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

    • Oiling

      After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

    • Sharpening

      It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

    • Dismantling

      It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

  • Parts replacement

    • Changing the blade

      When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.

    • Changing the anvil-blade

      When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

    • Changing the shock absorbers

      When the tool closes too abruptly during pruning the shock absorbers should be changed.