Made in Switzerland by FELCO

Product Information

  • In brief

    • Reliable: comfortable, light, sturdy handles made of forged aluminium with a lifetime guarantee* / blade and riveted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced
    • Efficient: easy cutting adjustment / wire cutting notch / sap groove
    • Ergonomic: non-slip coating
  • Recommended for

    Our recommendation(1: Recommended, 2: Strongly recommended, 3: Best fit)
    • Viticulture:**
    • Arboriculture:**
    • Horticulture:*
    • Parks and Gardens:**
    • Nursery:*
    • Small hand:
    • Average-sized hand:*
    • Large hand:***
    • Right-handed:***
    • Left-handed:*
  • FELCO technical specifications

    • Wire cutting notch
      Wire cutting notch

      The blades feature a notch that allows for the cutting of small wires without damaging the cutting edge.

    • Sap groove
      Sap groove

      The sap groove prevents the blade sticking when cutting "sappy" wood. It saves time and makes pruning easier by removing sap and debris after each cut.

    • Forged aluminum handles
      Forged aluminum handles

      Lightweight, strong and sturdy thanks to special aluminum alloys and advanced precision forging methods. Equipment comes with a lifetime guarantee*.

  • Accessories

  • Spare parts

    2/32/3Blade1x 2/3$14.67
    2/3-12/3-1Set1x 2/3 1x 2/11 1x 2/30
    2/92B2/92BKit1x 2/14 + 1x 2/12B + 2x 2/13$5.13
    4/44/4Anvil-blade with rivets1x 4/4 + 4x 2/7$10.76
    4/904/90Kit1x 4/9 + 1x 4/8$5.38
    2/912/91Kit2x 2/11$4.65
    4/14/1Handle without blade1x 4/1 + 3x 2/5B + 1x 2/10 + 1x 2/12 + 1x 2/13 + 1x 2/14 + 1x 4/35$17.97
    4/24/2Handle with anvil-blade1x 4/2 + 1x 4/4 + 4x 2/7 + 1x 4/36$24.21
    4/354/35Coating for blade handle1x 4/35$5.38
    4/364/36Coating for anvil-blade handle1x 4/36$5.38
    2/5B2/5BRivet for blade1x 2/5B
    2/72/7Rivet for anvil-blade1x 2/7$0.24
    4/84/8Bolt1x 4/8
    4/94/9Nut1x 4/9
    2/102/10Bush1x 2/10$3.79
    2/112/11White spring1x 2/11
    2/122/12Thumb catch1x 2/12$2.20
    2/132/13Spring for thumb catch1x 2/13$0.49
    2/142/14Screw for thumb catch1x 2/14$0.73
  • Maintenance

    • Cleaning

      It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

    • Oiling

      After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

    • Sharpening

      It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

    • Dismantling

      It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

  • Parts replacement

    • Changing the blade

      When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.

    • Changing the thumb catch

      When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

    • Changing the plastic coatings for handles

      If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.