• Green
  • Cut & hold roses and flowers pruning shear
Made in Switzerland by FELCO

Product Information

  • In brief

    • Reliable: comfortable, light, sturdy handles made of forged aluminium with a lifetime guarantee* / anvils made of aluminium with a lifetime guarantee* / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced
    • Efficient: easy, durable cutting adjustment / wire cutting notch / sap groove
    • Ergonomic: hand protection is provided by the cushion-shock absorber / non-slip coating / 2 opening positions for small or big cuts
  • Recommended for

    Our recommendation(1: Recommended, 2: Strongly recommended, 3: Best fit)
    • Special applications:***
    • Small hand:**
    • Average-sized hand:
    • Large hand:***
    • Right-handed:
    • Left-handed:
  • Accessories

  • Spare parts

    2/302/30Adjustment key1x 2/30
    100/3100/3Blade1x 100/3
    100/4100/4Anvil-blade with screw1x 100/4 + 1x6/6
    100/95100/95Anvils for blade and anvil-blade with screws1x 100/37 + 1x 100/36 + 4x 30/6
    6/906/90Kit1x 6/7 + 1x 2/16 + 1x 2/9 + 1x 6/8
    2/912/91Kit2x 2/11
    100/92100/92Kit1x 100/15 + 1x 2/18 + 1x 2/14 + 1x 2/12 + 1x 2/13 + 1x 2/20
    2/932/93Kit4x 2/18 + 6x 2/20
    6/946/94Kit1x 2/9 + 1x 6/8
    100/1100/1Handle without blade1x 100/1 + 3x 2/5B + 1x 2/19 + 1x 2/20 +1x 2/10 + 1x 2/13 + 1x 2/12 + 1x 2/14 + 1x 2/35
    11/211/2Handle without anvil-blade1x 11/2 + 1x 2/18 + 1x 2/36
    2/352/35Coating for blade handle1x 2/35
    2/362/36Coating for anvil-blade handle1x 2/36
    2/5B2/5BRivet for blade1x 2/5B
    6/66/6Screw for anvil-blade1x 6/6
    30/630/6Screw for anvil 4 mm1x 30/6
    6/86/8Bolt1x 6/8
    2/92/9Nut1x 2/9
    2/102/10Bush1x 2/10
    2/112/11White spring1x 2/11
    2/122/12Thumb catch1x 2/12
    2/132/13Spring for thumb catch1x 2/13
    2/142/14Screw for thumb catch1x 2/14
    100/15100/15Catch plate1x 100/15
    2/162/16Locking segment1x 2/16
    6/76/7Screw for locking segment1x 6/7
    2/182/18Cushion1x 2/18
    2/192/19Edging1x 2/19
    2/202/20Shock absorber1x 2/20
  • Maintenance

    • Cleaning

      It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

    • Oiling

      After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

    • Sharpening

      It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

    • Dismantling

      It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

  • Parts replacement

    • Changing the blade

      When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.

    • Changing the anvil-blade

      When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

    • Changing the shock absorber

      When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.

    • Changing the cushion

      When the tool closes too abruptly during pruning and the shock absorber is in good condition, the cushion must be changed.

    • Changing the thumb catch

      When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

    • Changing the plastic coatings for handles

      If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.