FELCO 51

Made in Switzerland by FELCO

Product Information

  • In brief

    • Reliable: comfortable, light, sturdy handles made of forged aluminium with a lifetime guarantee* / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced
    • Efficient: easy, durable cutting adjustment / Protection against the risk of hoof infections thanks to blades coated with XYLAN®
    • Ergonomic: hand and wrist protection and optimisation of the force exerted are provided by the ideal shape of the handles, the angled head and the cushion-shock absorber / non-slip coating
  • Recommended for

    Our recommendation(1: Recommended, 2: Strongly recommended, 3: Best fit)
    • Ovine and caprine rearing:***
    • Small hand:
    • Average-sized hand:
    • Large hand:
    • Right-handed:
    • Left-handed:
  • Accessories

  • Spare parts

    FELCOREF.DesignationCompositionPriceQuantity
    2/302/30Adjustment key1x 2/30C$0.65
    50/350/3Blade1x 50/3C$14.01
    50/450/4Anvil-blade1x 50/4C$13.48
    7/907/90Kit1x 7/7 + 1x 2/16 + 1x 2/9 + 1x 7/8C$12.44
    2/922/92Kit1x 2/15 + 1x 2/18 + 1x 2/14 + 1x 2/12 + 1x 2/13 + 1x 2/20C$6.15
    2/932/93Kit4x 2/18 + 6x 2/20C$8.51
    7/947/94Kit1x 2/9 + 1x7/8C$9.30
    51/151/1Handle without blade1x 51/1 + 3x 7/5B + 1x 2/19 + 1x 2/20 + 1x 7/10 + 1x 2/13 + 1x 2/12 + 1x 2/14 + 1x 6/35C$19.25
    7/27/2Handle without anvil-blade1x 7/2 + 1x 2/18 + 1x 7/36C$12.04
    6/356/35Coating for blade handle1x 6/35C$5.76
    7/367/36Coating for anvil-blade / anvil handle1x 7/36C$5.76
    7/5B7/5BRivet for blade1x 7/5BC$0.65
    7/67/6Screw for anvil-blade1x 7/6C$2.62
    7/87/8Bolt1x 7/8C$6.02
    2/92/9Nut1x 2/9C$5.24
    7/107/10Bush1x 7/10C$4.06
    50/1150/11White spring1x 50/11C$1.96
    2/122/12Thumb catch1x 2/12C$2.36
    2/132/13Spring for thumb catch1x 2/13C$0.52
    2/142/14Screw for thumb catch1x 2/14C$0.79
    2/152/15Catch plate1x 2/15C$2.36
    2/162/16Locking segment1x 2/16C$1.70
    7/77/7Screw for locking segment1x 7/7C$2.62
    2/182/18Cushion1x 2/18C$1.05
    2/192/19Edging1x 2/19C$0.65
    2/202/20Shock absorber1x 2/20C$1.05
  • Maintenance

    • Cleaning

      It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

    • Oiling

      After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

  • Parts replacement

    • Changing the shock absorber

      When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.

    • Changing the cushion

      When the tool closes too abruptly during pruning and the shock absorber is in good condition, the cushion must be changed.

    • Changing the thumb catch

      When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

    • Changing the plastic coatings for handles

      If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.