Made in Switzerland by FELCO

Product Information

  • In brief

    • A pneumatic pruning shear fitted with a spray device fixed to the anvil blade support.
    • The pruning cut is sprayed after the blade has cut the branch and is in the closed position.
    • If the protection product applied requires saturation of the pruned cut, just keep the lever pressed until the desired effect is achieved.
    • Operating pressure: 7 to 15 bar
    • Air consumption: 24 to 50 litres / min.
  • Recommended for

    Our recommendation(1: Recommended, 2: Strongly recommended, 3: Best fit)
    • Special applications:***
    • Small hand:**
    • Average-sized hand:**
    • Large hand:***
    • Right-handed:***
    • Left-handed:
  • FELCO technical specifications

    • Unidirectional spraying device
      Unidirectional spraying device

      Unidirectional spraying of liquid and viscous products. This model was especially designed to combat diseases common to old wood.

    • Micrometric adjustment
      Micrometric adjustment

      FELCO's micrometric adjustment system guarantees an optimal adjustment of the cutting head throughout the life of the tool. It ensures a clean and precise cut.

    • Passive safety
      Passive safety

      A manual thumb catch keeps the blade locked when the pruning shears are not in use.

    • Double piston
      Double piston

      Greater cutting strength which eliminates any difficulties during cutting.

    • Coil spring
      Coil spring

      Energy (air) saving device and faster blade release.

    • Forged aluminum cutting head support
      Forged aluminum cutting head support

      Lightweight, strong and sturdy thanks to special aluminum alloys and advanced precision forging methods. Equipment comes with a lifetime guarantee*.

  • Accessories

  • Spare parts

    2/302/30Adjustment key1x 2/30C$0.56
    70/170/1Blade1x 70/1C$63.01
    70/5070/50Anvil-blade1x 70/50C$67.50
    70/5870/58Pin1x 70/58C$1.12
    70/5970/59Screw1x 70/59C$0.84
    70/5270/52Bolt1x 70/52C$19.79
    70/5370/53Nut1x 70/53C$11.37
    70/5470/54Locking segment1x 70/54C$9.82
    70/5570/55Screw for locking segment1x 70/55C$0.56
    70/1170/11Coil spring1x 70/11C$4.77
    70/1270/12Piston with guiding rod1x 70/12C$45.61
    70/1370/13Locking screw1x 70/13C$6.46
    70/1470/14Shutting spring1x 70/14C$1.40
    70/1570/15Valve piston1x 70/15C$3.65
    70/1670/16Octogonal nut1x 70/16C$14.88
    70/1870/18Valve shutter1x 70/18C$8.56
    70/1970/19Commanding lever1x 70/19C$32.00
    70/2070/20Lever pin1x 70/20C$1.96
    70/2870/28Retaining ring1x 70/28C$2.95
    70/370/3Pushing link1x 70/3C$33.40
    70/3070/30O-ring1x 70/30C$5.21
    70/3170/31Shutting joint1x 70/31C$2.53
    70/3270/32Joint ring1x 70/32C$2.25
    70/3370/33O-ring1x 70/33C$2.39
    70/3470/34Paper joint1x 70/34C$1.40
    70/3670/36Shock absorber1x 70/36C$7.02
    70/3870/38Guiding screw1x 70/38C$7.30
    70/570/5Guiding bush1x 70/5C$19.37
    70/5170/51Head of cutter1x 70/51 + 2x 70/58 + 1x 70/36 + 1x 70/5C$96.97
    70/5670/56Axle1x 70/56C$5.19
    70/5770/57Clamp1x 70/57C$5.47
    70/670/6Cylinder1x 70/6C$94.16
    70/6670/66Safety slide1x 70/66C$8.84
    70/6770/67Flat safety spring1x 70/67
    70/6870/68Screw for slide1x 70/68
    70/870/8Piston with push rod1x 70/8C$67.50
    70/970/9Separating washer1x 70/9C$19.93